Product News

L-IP/L-Switch Release 6.0.4

L IP 1ECTB

L-Switch / L-IP Firmware 6.0.4 for LS-xxxxxCB, LS-xxCB, LIP-xECTB, LIP-xxECTB, LIP-xxxxECTB, and LIP-xxECRB Devices

New L-DALI Product Family: LDALI-MS2, LDALI-BM2, L-RC1

We are continuously improving our product portfolio and are delighted to present several new LOYTEC devices. Further information can be found in the product specification in the respective datasheets.

info118

The LDALI-MS2 Multi-Sensor supports DALI-2 and comes with an improved presence detection zone diameter of 10.8 m at 3 m mounting height. An increased number of detection zones guarantees a finer detection resolution. Thus, the sensor is optimized for use in typical environments, where even the small movements of somebody working at a desk have to be detected across the complete detection area.
Similar lux sensor resolution and range were improved to allow precise constant light control even at low lux levels.

The LDALI-BM2 Pushbutton Coupler will be DALI-2 compliant and will consume less bus power than its predecessor LDALI-BM1. The housing was optimized for mounting behind standard switches. Similar preconfectioned wires drastically reduce installation time. 

The L-RC1 IR Remote Control is optimized for room automation applications, allowing to control the rooms lights, sunblinds and HVAC system. It supports to individually cotrol up to two channels (groups of luminaires/blinds) and scene control. The L-RC1 is compatible with LDALI-MS2 and L-STAT devices.

LVIS-3E100 / LVIS-ME200 Firmware 6.2.8

lvis 100 re icon

LVIS-3E100 Firmware 6.2.8 for LVIS-3E100 Touch Panels (CEA-709)

LVIS-ME200 Firmware 6.2.8 for LVIS-ME200 Touch Panels (BACnet)

Download the latest version of the L-VIS User Manual.

 

New Releases NIC and LPA

NIC - LOYTEC Network Interface Software 4.2.3
This software package includes all needed drivers and tools to run and
develop applications on LOYTEC Network Interfaces.

LPA Software 3.7.2
The LPA is a software package that is used for protocol analysis of CEA709 and
CEA852 networks. It runs on LOYTEC Network Interfaces such as NIC709-USB100 or NIC852.