L-IOB Adapter

LIOB-A2 Adapter

LIOB-A4 Adapter

LIOB-A5 Adapter

3d-Model LIOB-A2 Adapter

3d-Model LIOB-A4 Adapter

3d-Model LIOB-A5 Adapter

3d-Model LIP-3333ECTC

L-IOB Adapter Datasheet
LOYTEC Device User Manual
Installation Instructions: LIOB-A2 / LIOB-A4, LIOB-A5
Certificates: EC
Downloads

The LIOB-A2/‌A4 Adapters can be used to extend the LIOB-Connect bus and to connect an external power supply.

The LIOB‑A5 Adapter is a terminator of the LIOB-Connect bus at the the end of the last segment. A terminator is needed if the total length of the bus exceeds 1 m.

24 LIOB-Connect I/O Modules can be connected through the LIOB-Connect bus. Up to 4 LIOB-Connect I/O Modules can be plugged directly using the built-in LIOB-Connect plug. If more than 4 modules are to be used, the LIOB-Connect chain must be split into two (or more) segments of modules using LIOB‑A2 and 4-wire cables (SEL, GND, A, B), or LIOB-A4 Adapters and standard RJ45 network cables. Each segment needs an external power supply, e.g. LPOW‑2415A. This means that with a full configuration of 24 LIOB-Connect I/O Modules, five additional power supplies and 10 LIOB-A2/‌A4 adapters are required.

If the length exceeds 1 m, either a LIOB-A2 Adapter or a LIOB-A5 adapter must be used at the end of the last segment as a termination. When using the LIOB-A2 adapter as network terminator, the terminal TERM has to be connected with terminal B.

Additionally, the L-IOB Adapters have a power output usable for external devices limited to 100 mA (LIOB-A2) or 400 mA (LIOB-A4/‌A5).

LPOW_LINX-120_LIOB_Connect_LIOB-A4_LIOB-A5

L-IOB Adapter Products
LIOB-A2
	L‑IOB Adapter 2 to split the LIOB‑Connect bus using 4-wire cables
	Start quote request Documentation and Software
	3D View

LIOB-A4
	L‑IOB Adapter 4 to split the LIOB‑Connect bus using RJ45 network cables
	Start quote request Documentation and Software
	3D View

LIOB-A5
	L‑IOB Adapter 5 to terminate the LIOB-Connect bus
	Start quote request Documentation and Software
	3D View

L-IOT1
	Add-on Software License to enable IoT functionality on LIOB-585/586/587/588/589, LIOB-590/591/592/593/594/595/596, LIOB-AIR, and LINX-102/103/202/203
	Start quote request Documentation and Software
L-IOT1
	Add-on Software License to enable IoT functionality on LIOB-585/586/587/588/589, LIOB-590/591/592/593/594/595/596, LIOB-AIR, and LINX-102/103/202/203
	Start quote request Documentation and Software

Telephony issues!

Due to issues with our telephone provider, we might not be able to answer phone calls right now. We are in contact with the provider to resolve the issue.

We apologize for the inconvenience.

L-IOB Adapter

L-IOB Adapter Products