KNX TP1 Interface
The KNX-Interface LKNX-300 allows the LINX‑12x/15x/22x Automation Servers, the LROC-100 Room Controller, and the LGATE-95x Universal Gateways to interface to KNX devices connected to a KNX TP1 Bus. The LKNX-300 Interface needs to be connected to the EXT-Port on the L-INX/L-ROC/L-GATE devices.
For the KNX integration, LOYTEC’s L-INX/L-ROC/L-GATE devices use an ETS4 project. The project data is exported from the ETS4 software and then imported in the LOYTEC L-INX/L-GATE Configurator. Thus, up to 1 000 data points from the KNX network can be used by the L-INX/L-ROC/L-GATE devices on each port supporting KNXnet/IP or KNX TP1.
KNX TP1 Interface | |
LKNX-300 | |
KNX interface to connect KNX TP1 devices | |
![]() ![]() | |
![]() | |
1a43e3eb71ca4d23b4e22a6805dd2bd9 |
Features
- KNX TP1 Interface for LINX‑12x/15x/22x, LROC-100/150 and LGATE-95x
- Access to a maximum of 1 000 KNX data points via KNX TP1 (L-INX/L-ROC/L-GATE)
- Configurable through ETS4 software via XML import
- Connected to the L-INX Automation Server, L-ROC Room Controller or LGATE-95x Gateway via port EXT
Specification
Dimensions in mm [inch]
LKNX-300
Specifications | |
---|---|
Dimensions (mm) | 55 x 100 x 60 (L x W x H) |
Installation | DIN rail mounting following DIN 43880, top hat rail EN 50022 |
Power supply | Via the KNX TP1 bus |
Operating conditions | 0 °C to 50 °C, 10 – 90 % RH, non condensing, degree of protection: IP40, IP20 (terminals) |
Installation | Attachable or connected with a 3-wire cable, max. 1 m |
Interfaces |
1 x EXT
1 x KNX TP1
LIOB-Connect is looped through the device
|
Baud rate | 9600 baud |
Tools | L‑INX/L-GATE Configurator |
For use with | LINX-12x, LINX-15x, LINX-22x, LROC-100, LGATE-950, LGATE-951 |
Resource limits | |
Number of KNX TP1 data points | 1 000 |