LIOB-IP852 I/O Modules LonMark

CEA-709
Ethernet (Ethernet Switch)
LIOB-IP
Local Manual Operation
VNC (Virtual Network Computing)
Web Server for Device Configuration
Backup / Restore
Local I/Os
LWEB-900 Integrated Building Management System
Network Security
LonMark-certified Product
UL Recognized Product

The LIOB-45x Modules are LonMark certified and communicate over Ethernet/IP-852 in the LonMark System. They provide up to 512 address table entries (ECS mode) which eliminates all binding restrictions.

LonMark IP-852 Channel over Ethernet

The LIOB-45x I/O Modules are equipped with two Ethernet ports including a built-in Ethernet switch. This allows for building a daisy chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

The LIOB-45x Modules are equipped with a Web interface to query the device status. The local display can be accessed via VNC.

LIOB-IP Mode

The LIOB‑45x Modules can be switched to LIOB‑IP mode using manual local operation. In LIOB‑IP mode, the LIOB‑45x Modules extend L‑INX Automation Servers, L‑ROC Room Controllers and L-IOB I/O Controllers with physical inputs and outputs via plug and play.

Local Operation and Override

All L-IOB I/O Modules are equipped with an LCD display (128x64) with backlight and jog dial for manual local operation. Device and data point information is displayed in text form and via graphical symbols.

L-INX I/O Integration through LIOB-IP via Plug 'n Play
Plug and play I/O integration through LIOB-IP

Features

  • I/O module with physical inputs and outputs
  • Ethernet/IP network interface
  • SNVT-based interface for integration on the LonMark IP-852 channel
  • LonMark certified
  • Up to 512 address table entries (ECS mode)
  • Manual operation using the jog dial
  • 128x64 graphic display with backlight
  • Local access to information about device status and data points in clear text and symbols
  • Connected to the L‑INX Automation Server, L‑ROC Room Controller and L-IOB I/O Controller via LIOB‑IP
  • Automatic integration into device configurations with L‑INX, L‑ROC and L-IOB I/O Controller,
  • Easy device replacement without any additional software
  • Integrated Web server for the device configuration
  • LNS plug‑in for the device configuration in the LonMark System

LIOB-IP852 I/O Modules LonMark Products


LIOB-450
LIOB-450

LIOB-IP852 I/O Module: 8 UI, 2 DI, 2 AO, 8 DO (4 x Relay 6 A, 4 x Triac 0.5 A)

Start quote request
Documentation and Software
3D View

LIOB-451
LIOB-451

LIOB-IP852 I/O Module: 8 UI, 12 DI

Start quote request
Documentation and Software
3D View

LIOB-452
LIOB-452

LIOB-IP852 I/O Module: 6 UI, 6 AO, 8 DO (8 x Relay 6 A)

Start quote request
Documentation and Software
3D View

LIOB-453
LIOB-453

LIOB-IP852 I/O Module: 6 UI, 6 AO, 5 DO (4 x Relay 16 A, 1 x Relay 6 A)

Start quote request
Documentation and Software
3D View

LIOB-454
LIOB-454

LIOB-IP852 I/O Module: 7 UI, 4 AO, 7 DO (5 x Relay 6 A, 2 x Triac 0.5 A), 1 Pressure Sensor

Start quote request
Documentation and Software
3D View

LPOW-2415A
LPOW-2415A

LIOB-Connect Power Supply, 24 VDC, 15 W

Start quote request
Documentation and Software
3D View

LPOW-2415B
LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

Start quote request
Documentation and Software
3D View

L-TEMP2
L-TEMP2External temperature sensor (NTC10K) for use with L-IOB Universal Inputs
Start quote request
Documentation and Software